Pipeline and Valve Inspection Close all valves: Ensure that the bag filter inlet valve, outlet valve, drain valve, and exhaust valve are all in the closed position. Check that pipeline connections (such as flanges and quick couplings) are secure, without looseness or corrosion. Pipeline clearance:…
Read More
A bag filter is a highly efficient filtration device that removes impurities from fluids through filter bags. It is widely used in industries such as chemicals, food processing, water treatment, and pharmaceuticals. Its operating procedures must follow the logical sequence of “Preparation – Start-up –…
Read More
Pretreatment Recommendation for Bag Filter If the material contains a large amount of coarse particles (e.g., ≥100 μm), it is recommended to install a coarse filtration device (such as a basket filter or a standard bag filter) upstream of the high-precision filter. This prevents rapid…
Read More
1. Reasonable Selection of Filtration Precision for Bag Filter Example: For electronic cleaning water, 1 μm is sufficient; for pharmaceutical liquids, 0.5 μm may be required; for general fine chemicals, 5–10 μm is more economical (to avoid excessive filtration that leads to short filter bag…
Read More
A high-precision bag filter is a filtration device specifically designed for the efficient removal of fine particles (typically with filtration accuracy ranging from 1 μm to 50 μm, and in some cases as low as 0.5 μm). It is widely used in applications that demand…
Read More
Contact us
Filtration Process: The bag filter features a simple and easy-to-install structure, consisting of a housing, filter bag, and support basket. Liquid flows in from the top inlet flange and enters the interior of the filter bag. Solid impurity particles are intercepted by the filter media…
Read More
The bag filter is a versatile filtration device known for its innovative structure, compact size, easy and flexible operation, energy efficiency, high filtration efficiency, sealed operation, and strong adaptability. It is a pressure-type filtration system where the liquid flows into the filter bag through the…
Read More
The core advantage of the dome-top (turtle-back) design lies in its pressure resistance. Standard bag filters typically withstand pressures up to 0.6 MPa, whereas the dome-top filter, with its arched cover structure, can handle high pressures ranging from 1.0 to 1.6 MPa. This is primarily…
Read More
The multi-bag filter is ideal for high-flow filtration applications. With a large filtration area, it can hold more impurities and is suitable for operations that require extended service life before replacing filter bags. The filter is designed with a side-in, bottom-out flow pattern, ensuring more…
Read More
A swing arm type bag filter housing (side-opening rotary type) features the following structural characteristics: Structural Features: A rotating arm is mounted on the side or top of the housing, allowing the cover to open and close via a hinge or pivot shaft. Sealing is…
Read More
Filtration Mechanism of Bag Filter: When liquid flows through the filter bag, solid particles are trapped either on the surface or inside the filter bag, while the clean liquid exits through the outlet. Main Components: Auxiliary Components: Differential Pressure Gauge: Monitors the clogging status of…
Read More
A bag filter is a pressure filtration device primarily composed of a filter housing, filter cover, quick-opening mechanism, and a stainless steel reinforced mesh for filter bags. Bag filters offer several advantages, including a well-designed structure, excellent sealing performance, high flow capacity, and easy operation.
Read More
Bag filters are widely used filtration equipment, made of stainless steel for hygiene and safety. They are pressure filtration devices consisting mainly of a filter housing, filter cover, and a stainless steel filter bag support mesh. ❖ Water Treatment: System purification in cooling devices, filtration…
Read More
Innovative Structure: The multi-bag filter features a novel design, compact size, easy and flexible operation, energy efficiency, high performance, sealed operation, and strong applicability, making it a versatile filtering device. Computer Layout: The filter basket of the bag filter is made of high-strength stainless steel…
Read More
A multi-bag filter is a newly designed, compact, easy-to-operate, energy-efficient, high-performance, sealed, and versatile filtration device. This type of filter is a pressure filtration system where liquid flows into the filter bag through an inlet pipe located on the side of the filter housing. The…
Read More
A bag filter is designed with a user-friendly, self-balancing V-shaped clamp closure mechanism, replacing the traditional cumbersome swing-arm design. It is particularly suitable for applications requiring frequent filter element replacement or high flow demand. Developed in PPH, PVDF, and ETFE materials: The bag filter is…
Read More
Structure A bag filter primarily consists of three main components: Working Principle The bag filter is a pressure-based filtration system. Liquid enters the filter from the top or side inlet pipe and flows into the filter bag, which is housed within the support basket. The…
Read More
Innovative Filtration Design The unique design effectively prevents the filter bag from collapsing into the support basket under operating pressure, ensuring 100% leak-free performance. Enhanced Sealing Equipped with well-configured sealing rings, an additional seal is placed between the inlet and outlet to ensure system reliability.
Read More
1. Basic Structure of the Bag Filter The bag filter primarily consists of three components: filter bags, the filter housing, and a support frame. Working Principle The fluid to be filtered enters the filter under pressure. As it passes through the filter bag, solid particles…
Read More
A bag filter is a versatile filtration device known for its innovative design, compact size, ease of operation, energy efficiency, and high adaptability for closed-system applications. A bag filter consists of three main parts: This is a pressure-driven filtration system where liquid enters the filter…
Read More
If the bag filter continues to filter the same liquid, cleaning is unnecessary. However, if filtering a different type of liquid, the filter must be cleaned before use. Maintenance and Replacement of O-Rings Maintenance: When in use, the O-ring should be properly aligned and placed…
Read More
Replacing the Filter Bag: High-efficiency filter bags are made from fine fibers that are generally hydrophobic, meaning they repel water and do not get wet easily. Therefore, like other filter elements made from similar materials, they need to be wetted with a liquid of lower…
Read More
I. Daily Operation Regularly check the pressure difference between the inlet and outlet of the bag filter system during operation. When the pressure difference reaches 0.05~0.1 MPa, replace the filter bag promptly to avoid bag rupture or damage to the support mesh due to excessive…
Read More
I. Principle of the Bag Filtration System A bag filter is a new type of filtration system in which the filter bag is supported by a metal inner mesh. Liquid flows in through the inlet, passes through the filter bag, and flows out, with impurities…
Read More
The bag filter consists of three main parts: the filter container, the support basket, and the quick-opening structure. Working Principle: This type of filter is a pressure filtration device. Liquid enters the filter through the top or side inlet pipe and flows into the filter…
Read More
Single bag and multi-bag filters are innovative, compact, user-friendly, energy-efficient, and highly adaptable multi-purpose filtration devices designed for closed operation. Applications: These filters can be widely used in various industries, including paint, beer, vegetable oil, cosmetics, chemical products, petroleum products, textile chemicals, photochemicals, electroplating solutions,…
Read More
1. Introduction A bag filter operates under pressure filtration. The entire system includes a filtration vessel, support basket, and filter bag. Features Filtration Principle The liquid to be filtered is introduced from the top of the filter bag, which is supported by the basket. This…
Read More
Bag filters can be classified by the number of filter bags, including single-bag, double-bag, and multi-bag types. According to the liquid flow, there are side-inlet and top-inlet options. Based on the connection method, they can be categorized as single-unit, parallel interchangeable, multi-unit combination, or mobile…
Read More
Product Overview This series of multi-bag filters is suitable for high-flow filtration applications. With a large filtration area, it can capture more impurities and is ideal for scenarios where a longer filter bag replacement interval is desired. The filter is designed with a side-inlet and…
Read More
A bag filter is an energy-efficient and effective water filtration device commonly used in water treatment. The device mainly consists of a filter housing, filter cover, quick-opening mechanism, and a stainless steel reinforced mesh for the filter bag. The liquid enters the filter through the…
Read More
A bag filter is an essential device in the production process, typically installed at the inlet of equipment to remove impurities from the medium, thereby protecting valves and ensuring the proper functioning of the equipment. When fluid enters the equipment, it passes through the filter…
Read More
Widely used for chemical decarbonization, solid-liquid separation, and filtration of high-flow water and chemical products. The high-flow bag filter is a versatile filtration device characterized by a reasonable structure, easy and flexible operation, energy efficiency, high performance, broad application range, and strong adaptability. It comes…
Read More
The PP Bag Filter Housing from JX Filtration is a reliable and versatile filtration solution designed for various industrial applications. Made from durable polypropylene (PP), it is available in single and 2-4 bags filter housing configurations, allowing for flexibility in different processing needs. The PP…
Read More
Regularly check if all the connecting pipes on the bag filter are secure, and ensure there are no leaks or damage. Replacing the Filter Bag First, close the inlet valve and open the exhaust valve to reduce the pressure inside the filter to normal. Open…
Read More
The design of the bag filter structure is built to handle high filtration pressures and withstand water hammer pressure surges. The bag filter is made up of three main parts: the filter housing, filter basket, and filter bag, with a simple and compact design. Filtration…
Read More
Description: Designed for users who prioritize efficiency, safety, and durability, the quick-opening multi-bag filter is ideal for filtering liquids with high impurity content, frequent bag changes, or 24/7 continuous production requiring rapid filter switchovers. It is particularly beneficial for large factories with multiple large-scale bag…
Read More
The multi-bag filter is a new type of filtration system. Inside the liquid multi-bag filter, a perforated plate basket supports the liquid filter bags. Liquid enters through the inlet, is filtered through the filter bags, and then exits, while impurities are trapped inside the filter…
Read More
JX FILTRATION Bag Filter Features and Advantages: Applications: Paint, pharmaceuticals, petroleum products, wastewater, industrial water, industrial wastewater, and more. Any Requirements, Contact Us Now! Kris Email/Teams: kris@filtrationchina.com Mobile/Whatsapp/Wechat: +86 18980776200
Read More
As efforts to tackle water pollution in China increase, new standards and policies have been introduced, raising the discharge requirements for industrial wastewater and sewage treatment plants. To achieve consistently high discharge standards and facilitate the recycling and reuse of waste liquids and gases, advanced…
Read More
1. Product Overview This series of multi-bag filter housings is suitable for high-flow filtration applications. With a large filtration area, they can accommodate more impurities and are ideal for scenarios where longer intervals between filter bag replacements are desired. The filter design features side entry…
Read More
Filtration Process The bag filter is an essential device in the production process, typically installed at the inlet of equipment to remove impurities from the medium, thereby protecting valves and equipment for normal use. When fluid enters the equipment and passes through the filter bag,…
Read More
Specifications: Bag filters are divided into: single bag filters, multi-bag filters, and sandwich type bag filters. Filter Operation and Precautions: The operation of this machine is simple. When using it, simply install the required grade of filter bag in the filter cylinder, check if the…
Read More
Four Major Classifications: (1) Single Bag Filter The bag filter is designed for side inlet and outlet or bottom inlet and outlet configurations, using filter bags as the filtration core. It is suitable for precise liquid filtration, removing trace impurities. Compared to cartridge filters, it…
Read More
Single and multi-bag filter is a novel, compact, operationally simple and flexible, energy-saving, highly efficient, and airtight multi-purpose filtration equipment. Bag filters can be widely used in industries such as paint, beer, vegetable oil, cosmetics, chemicals, petroleum products, textile chemicals, photosensitive chemicals, electroplating solutions, milk,…
Read More
The bag filter is a versatile filtration equipment with novel structure, small size, easy and flexible operation, energy-saving, high efficiency, sealed operation, and strong applicability. It is a pressure filtration device mainly composed of a filter cartridge body, filter cartridge cover with quick opening mechanism,…
Read More
The multi-bag filter features a streamlined rocker arm handwheel for easy cover opening, allowing a single person to replace filter bags effortlessly. The filter material can be designed based on the user's material characteristics, including carbon steel, stainless steel 304, 316, and materials with anti-corrosion…
Read More
I. Practicality Practicality is, of course, a crucial consideration when selecting a bag filter housing. This equipment requires frequent replacement of filter bags during use. If it is a high-quality device, it will have an automatic pressure distribution function when the liquid enters, minimizing the…
Read More
Bag filter housings, especially those made of stainless steel, require careful attention during operation. These filter housings consist of a metal mesh basket supporting the filter bag. Liquid flows in through the inlet, undergoes filtration through the bag, and exits through the outlet, leaving impurities…
Read More
The Multi Bag Filter Housing adopts a streamlined handwheel opening design, allowing one person to easily replace filter bags. The filter housing material can be designed based on the user's material characteristics, including carbon steel, stainless steel 304, 316, sprayed anticorrosive materials, etc. The surface…
Read More
Bag filters stand out as versatile, compact, easy-to-operate, energy-efficient, and effective filtration equipment. Internally supported by a metal mesh basket, liquid flows in through the inlet, passes through the filter bag, and exits through the outlet, with impurities intercepted within the bag. The filter bag…
Read More
A bag filter is a highly practical and versatile filtration device. Internally supported by a metal mesh basket, the liquid flows in from the inlet, passes through the filter bag, and exits from the outlet, with impurities being trapped in the filter bag. After replacing…
Read More
In the world of industrial filtration, adaptability and convenience are key. JX Filtration, a trusted name in the industry, understands that not all filtration needs are the same. One of our innovative solutions, the Swing-Arm Type Bag Filter Housing, is designed to provide versatility and…
Read More
In the realm of industrial filtration, choosing the right equipment is a critical decision that can significantly impact the efficiency and effectiveness of your filtration processes. JX Filtration is committed to providing innovative solutions tailored to your unique needs, and our Multi Bag Filter Housing…
Read More
In the realm of industrial filtration, precision, reliability, and ease of operation are paramount. JX Filtration is a trailblazer in filtration technology, and our Swing-Arm Type Bag Filter Housing represents a pinnacle of innovation and efficiency. Discover the exceptional advantages of our Swing-Arm Type Bag…
Read More
At JX Filtration, we understand the importance of precision and efficiency in your operations, and we are committed to delivering the most suitable filtration solution. Understanding Your Needs: To ensure we recommend the right Multi Bag Filter Housing for your application, we begin with a…
Read More
In the world of industrial filtration, the choice between a Single Bag Filter Housing and a Multi Bag Filter Housing can significantly impact your filtration efficiency and overall process. Here, we highlight the key differences between these two types of filter housings to help you…
Read More
Not all industries are created equal, and for each we offer unique bag filter housings to meet all your needs. Filter vessels are usually stripped and passivated for post-soldering finish. As an option, filter containers can be bead-blasted for a more uniform appearance or polished…
Read More
Bag filter housings are popular because of their many advantages. Reliability, performance, simplicity, filtration quality and economy are just some of it best features. It is also possible to adapt the filter vessel, so that it can be easily integrated into an existing installation. All…
Read More
The JX Filtration stainless steel bag filter housing is our convenient and economical filtration solution designed to meet the needs of a wide range of industries: Chemical industry, pharmacy, automobile industry, light industry, food industry, electroplating industry, etc., offering the possibility to use a wide variety of filter bags to…
Read More
The industrial bag filter housing consists of a cylinder, usually made of 304 or 316L stainless steel. The filter container can accommodate one or more filter bags depending on the flow rate. The liquid to be filtered enters the bag from the top of the…
Read More
The JX Filtration stainless steel Bag Filter Housing is our convenient and economical filtration solution designed to meet the needs of a wide range of industries: Chemical industry, pharmacy, automobile industry, light industry, food industry, electroplating industry, etc., offering the possibility to use a wide…
Read More
The bag filter housing can carry a large operating pressure, with small pressure loss, low operating cost and obvious energy saving effect. The filtration accuracy of the filter bag is continuously improved, and the bag filter has a large processing capacity, a small footprint, and…
Read More
The bag filter is mainly made of stainless steel, which is a professional liquid filtering equipment. It can effectively remove particles of different sizes in the liquid. In addition, the backwashing function can also enhance the filtering effect of the bag filter. The filter is…
Read More
At present, there are various types of bag filters on the market, including stainless steel bag filters, top entry bag filters, side entry series flat cover bag filters, and PP bag filters. This article mainly introduces the characteristics of these types of bag filters. Stainless…
Read More
Background: With the rapid development of my country's national economy, the automobile industry has ushered in a period of rapid development. With the substantial growth of automobile production, people have also put forward higher requirements for automobile quality. In the automobile coating production line, from…
Read More
In many industries, filters are often used. With the continuous development of technical means, bag filters have been widely used. But many customers are often overwhelmed by the lack of relevant knowledge when choosing a bag filter. So this article will help customers better choose…
Read More
The Bag Filter for Water is divided into two types from the top cover locking device: eyebolt and V-hoop type, and four types from the top cover opening method: spring force arm assisted opening type and vertical lifting and shifting type, quick open type and…
Read More
The function of the Food Grade Bag Filter Housing is to filter and purify raw water so that it can meet the standards for use in the food industry or for drinking. Therefore, the filtration performance of the food-grade bag filter is more stringent. The…
Read More
The Duplex Bag Filter Housing is composed of two cylinders and connecting pipelines. The filter cylinder is equipped with a stainless steel filter screen and a filter screen support basket; the top is equipped with an air release valve, which is used to discharge the…
Read More
JX Filtration series multiple bags filter is suitable for flow rate with 60~5000M3/H conditions. A filter with a small number of filter bags is equipped with a handwheel and davit arm, which is configured with standard bearing, so it is convenient for opening and operation.
Read More
Jacketed Bag Filter Housing has double layers. There is an external layer outside the housing. With an layer inlet and an outlet is equipment on the external layer, steam, water and conduction oil can be introduced into the it. By this way, this filter can…
Read More
Working Principle The Multi Bag Filter Housing is supported by the stainless steel mesh inside. The liquid flows into the chamber via inlet and go through the filter bag. The impurities will be blocked in the filter bag. The filter bag can be reused repeatedly…
Read More
JX Filtration's polyline bag filter housing is constructed with glass fiber reinforced polypropylene without metal components to rust or corrode. This kind of bag filter housing is widely applied in seawater treatment, petrochemicals, paints, inks, resins, and coatings. The most crucial feature of polyline bag…
Read More